"""
=========
PointPens
=========
Where **SegmentPens** have an intuitive approach to drawing
(if you're familiar with postscript anyway), the **PointPen**
is geared towards accessing all the data in the contours of
the glyph. A PointPen has a very simple interface, it just
steps through all the points in a call from glyph.drawPoints().
This allows the caller to provide more data for each point.
For instance, whether or not a point is smooth, and its name.
"""
import math
from typing import Any, Optional, Tuple, Dict
from fontTools.misc.loggingTools import LogMixin
from fontTools.pens.basePen import AbstractPen, MissingComponentError, PenError
from fontTools.misc.transform import DecomposedTransform, Identity
__all__ = [
"AbstractPointPen",
"BasePointToSegmentPen",
"PointToSegmentPen",
"SegmentToPointPen",
"GuessSmoothPointPen",
"ReverseContourPointPen",
]
[docs]
class AbstractPointPen:
"""Baseclass for all PointPens."""
[docs]
def beginPath(self, identifier: Optional[str] = None, **kwargs: Any) -> None:
"""Start a new sub path."""
raise NotImplementedError
[docs]
def endPath(self) -> None:
"""End the current sub path."""
raise NotImplementedError
[docs]
def addPoint(
self,
pt: Tuple[float, float],
segmentType: Optional[str] = None,
smooth: bool = False,
name: Optional[str] = None,
identifier: Optional[str] = None,
**kwargs: Any,
) -> None:
"""Add a point to the current sub path."""
raise NotImplementedError
[docs]
def addComponent(
self,
baseGlyphName: str,
transformation: Tuple[float, float, float, float, float, float],
identifier: Optional[str] = None,
**kwargs: Any,
) -> None:
"""Add a sub glyph."""
raise NotImplementedError
[docs]
def addVarComponent(
self,
glyphName: str,
transformation: DecomposedTransform,
location: Dict[str, float],
identifier: Optional[str] = None,
**kwargs: Any,
) -> None:
"""Add a VarComponent sub glyph. The 'transformation' argument
must be a DecomposedTransform from the fontTools.misc.transform module,
and the 'location' argument must be a dictionary mapping axis tags
to their locations.
"""
# ttGlyphSet decomposes for us
raise AttributeError
[docs]
class BasePointToSegmentPen(AbstractPointPen):
"""
Base class for retrieving the outline in a segment-oriented
way. The PointPen protocol is simple yet also a little tricky,
so when you need an outline presented as segments but you have
as points, do use this base implementation as it properly takes
care of all the edge cases.
"""
def __init__(self):
self.currentPath = None
[docs]
def beginPath(self, identifier=None, **kwargs):
if self.currentPath is not None:
raise PenError("Path already begun.")
self.currentPath = []
def _flushContour(self, segments):
"""Override this method.
It will be called for each non-empty sub path with a list
of segments: the 'segments' argument.
The segments list contains tuples of length 2:
(segmentType, points)
segmentType is one of "move", "line", "curve" or "qcurve".
"move" may only occur as the first segment, and it signifies
an OPEN path. A CLOSED path does NOT start with a "move", in
fact it will not contain a "move" at ALL.
The 'points' field in the 2-tuple is a list of point info
tuples. The list has 1 or more items, a point tuple has
four items:
(point, smooth, name, kwargs)
'point' is an (x, y) coordinate pair.
For a closed path, the initial moveTo point is defined as
the last point of the last segment.
The 'points' list of "move" and "line" segments always contains
exactly one point tuple.
"""
raise NotImplementedError
[docs]
def endPath(self):
if self.currentPath is None:
raise PenError("Path not begun.")
points = self.currentPath
self.currentPath = None
if not points:
return
if len(points) == 1:
# Not much more we can do than output a single move segment.
pt, segmentType, smooth, name, kwargs = points[0]
segments = [("move", [(pt, smooth, name, kwargs)])]
self._flushContour(segments)
return
segments = []
if points[0][1] == "move":
# It's an open contour, insert a "move" segment for the first
# point and remove that first point from the point list.
pt, segmentType, smooth, name, kwargs = points[0]
segments.append(("move", [(pt, smooth, name, kwargs)]))
points.pop(0)
else:
# It's a closed contour. Locate the first on-curve point, and
# rotate the point list so that it _ends_ with an on-curve
# point.
firstOnCurve = None
for i in range(len(points)):
segmentType = points[i][1]
if segmentType is not None:
firstOnCurve = i
break
if firstOnCurve is None:
# Special case for quadratics: a contour with no on-curve
# points. Add a "None" point. (See also the Pen protocol's
# qCurveTo() method and fontTools.pens.basePen.py.)
points.append((None, "qcurve", None, None, None))
else:
points = points[firstOnCurve + 1 :] + points[: firstOnCurve + 1]
currentSegment = []
for pt, segmentType, smooth, name, kwargs in points:
currentSegment.append((pt, smooth, name, kwargs))
if segmentType is None:
continue
segments.append((segmentType, currentSegment))
currentSegment = []
self._flushContour(segments)
[docs]
def addPoint(
self, pt, segmentType=None, smooth=False, name=None, identifier=None, **kwargs
):
if self.currentPath is None:
raise PenError("Path not begun")
self.currentPath.append((pt, segmentType, smooth, name, kwargs))
[docs]
class PointToSegmentPen(BasePointToSegmentPen):
"""
Adapter class that converts the PointPen protocol to the
(Segment)Pen protocol.
NOTE: The segment pen does not support and will drop point names, identifiers
and kwargs.
"""
def __init__(self, segmentPen, outputImpliedClosingLine=False):
BasePointToSegmentPen.__init__(self)
self.pen = segmentPen
self.outputImpliedClosingLine = outputImpliedClosingLine
def _flushContour(self, segments):
if not segments:
raise PenError("Must have at least one segment.")
pen = self.pen
if segments[0][0] == "move":
# It's an open path.
closed = False
points = segments[0][1]
if len(points) != 1:
raise PenError(f"Illegal move segment point count: {len(points)}")
movePt, _, _, _ = points[0]
del segments[0]
else:
# It's a closed path, do a moveTo to the last
# point of the last segment.
closed = True
segmentType, points = segments[-1]
movePt, _, _, _ = points[-1]
if movePt is None:
# quad special case: a contour with no on-curve points contains
# one "qcurve" segment that ends with a point that's None. We
# must not output a moveTo() in that case.
pass
else:
pen.moveTo(movePt)
outputImpliedClosingLine = self.outputImpliedClosingLine
nSegments = len(segments)
lastPt = movePt
for i in range(nSegments):
segmentType, points = segments[i]
points = [pt for pt, _, _, _ in points]
if segmentType == "line":
if len(points) != 1:
raise PenError(f"Illegal line segment point count: {len(points)}")
pt = points[0]
# For closed contours, a 'lineTo' is always implied from the last oncurve
# point to the starting point, thus we can omit it when the last and
# starting point don't overlap.
# However, when the last oncurve point is a "line" segment and has same
# coordinates as the starting point of a closed contour, we need to output
# the closing 'lineTo' explicitly (regardless of the value of the
# 'outputImpliedClosingLine' option) in order to disambiguate this case from
# the implied closing 'lineTo', otherwise the duplicate point would be lost.
# See https://github.com/googlefonts/fontmake/issues/572.
if (
i + 1 != nSegments
or outputImpliedClosingLine
or not closed
or pt == lastPt
):
pen.lineTo(pt)
lastPt = pt
elif segmentType == "curve":
pen.curveTo(*points)
lastPt = points[-1]
elif segmentType == "qcurve":
pen.qCurveTo(*points)
lastPt = points[-1]
else:
raise PenError(f"Illegal segmentType: {segmentType}")
if closed:
pen.closePath()
else:
pen.endPath()
[docs]
def addComponent(self, glyphName, transform, identifier=None, **kwargs):
del identifier # unused
del kwargs # unused
self.pen.addComponent(glyphName, transform)
[docs]
class SegmentToPointPen(AbstractPen):
"""
Adapter class that converts the (Segment)Pen protocol to the
PointPen protocol.
"""
def __init__(self, pointPen, guessSmooth=True):
if guessSmooth:
self.pen = GuessSmoothPointPen(pointPen)
else:
self.pen = pointPen
self.contour = None
def _flushContour(self):
pen = self.pen
pen.beginPath()
for pt, segmentType in self.contour:
pen.addPoint(pt, segmentType=segmentType)
pen.endPath()
[docs]
def moveTo(self, pt):
self.contour = []
self.contour.append((pt, "move"))
[docs]
def lineTo(self, pt):
if self.contour is None:
raise PenError("Contour missing required initial moveTo")
self.contour.append((pt, "line"))
[docs]
def curveTo(self, *pts):
if not pts:
raise TypeError("Must pass in at least one point")
if self.contour is None:
raise PenError("Contour missing required initial moveTo")
for pt in pts[:-1]:
self.contour.append((pt, None))
self.contour.append((pts[-1], "curve"))
[docs]
def qCurveTo(self, *pts):
if not pts:
raise TypeError("Must pass in at least one point")
if pts[-1] is None:
self.contour = []
else:
if self.contour is None:
raise PenError("Contour missing required initial moveTo")
for pt in pts[:-1]:
self.contour.append((pt, None))
if pts[-1] is not None:
self.contour.append((pts[-1], "qcurve"))
[docs]
def closePath(self):
if self.contour is None:
raise PenError("Contour missing required initial moveTo")
if len(self.contour) > 1 and self.contour[0][0] == self.contour[-1][0]:
self.contour[0] = self.contour[-1]
del self.contour[-1]
else:
# There's an implied line at the end, replace "move" with "line"
# for the first point
pt, tp = self.contour[0]
if tp == "move":
self.contour[0] = pt, "line"
self._flushContour()
self.contour = None
[docs]
def endPath(self):
if self.contour is None:
raise PenError("Contour missing required initial moveTo")
self._flushContour()
self.contour = None
[docs]
def addComponent(self, glyphName, transform):
if self.contour is not None:
raise PenError("Components must be added before or after contours")
self.pen.addComponent(glyphName, transform)
[docs]
class GuessSmoothPointPen(AbstractPointPen):
"""
Filtering PointPen that tries to determine whether an on-curve point
should be "smooth", ie. that it's a "tangent" point or a "curve" point.
"""
def __init__(self, outPen, error=0.05):
self._outPen = outPen
self._error = error
self._points = None
def _flushContour(self):
if self._points is None:
raise PenError("Path not begun")
points = self._points
nPoints = len(points)
if not nPoints:
return
if points[0][1] == "move":
# Open path.
indices = range(1, nPoints - 1)
elif nPoints > 1:
# Closed path. To avoid having to mod the contour index, we
# simply abuse Python's negative index feature, and start at -1
indices = range(-1, nPoints - 1)
else:
# closed path containing 1 point (!), ignore.
indices = []
for i in indices:
pt, segmentType, _, name, kwargs = points[i]
if segmentType is None:
continue
prev = i - 1
next = i + 1
if points[prev][1] is not None and points[next][1] is not None:
continue
# At least one of our neighbors is an off-curve point
pt = points[i][0]
prevPt = points[prev][0]
nextPt = points[next][0]
if pt != prevPt and pt != nextPt:
dx1, dy1 = pt[0] - prevPt[0], pt[1] - prevPt[1]
dx2, dy2 = nextPt[0] - pt[0], nextPt[1] - pt[1]
a1 = math.atan2(dy1, dx1)
a2 = math.atan2(dy2, dx2)
if abs(a1 - a2) < self._error:
points[i] = pt, segmentType, True, name, kwargs
for pt, segmentType, smooth, name, kwargs in points:
self._outPen.addPoint(pt, segmentType, smooth, name, **kwargs)
[docs]
def beginPath(self, identifier=None, **kwargs):
if self._points is not None:
raise PenError("Path already begun")
self._points = []
if identifier is not None:
kwargs["identifier"] = identifier
self._outPen.beginPath(**kwargs)
[docs]
def endPath(self):
self._flushContour()
self._outPen.endPath()
self._points = None
[docs]
def addPoint(
self, pt, segmentType=None, smooth=False, name=None, identifier=None, **kwargs
):
if self._points is None:
raise PenError("Path not begun")
if identifier is not None:
kwargs["identifier"] = identifier
self._points.append((pt, segmentType, False, name, kwargs))
[docs]
def addComponent(self, glyphName, transformation, identifier=None, **kwargs):
if self._points is not None:
raise PenError("Components must be added before or after contours")
if identifier is not None:
kwargs["identifier"] = identifier
self._outPen.addComponent(glyphName, transformation, **kwargs)
[docs]
def addVarComponent(
self, glyphName, transformation, location, identifier=None, **kwargs
):
if self._points is not None:
raise PenError("VarComponents must be added before or after contours")
if identifier is not None:
kwargs["identifier"] = identifier
self._outPen.addVarComponent(glyphName, transformation, location, **kwargs)
[docs]
class ReverseContourPointPen(AbstractPointPen):
"""
This is a PointPen that passes outline data to another PointPen, but
reversing the winding direction of all contours. Components are simply
passed through unchanged.
Closed contours are reversed in such a way that the first point remains
the first point.
"""
def __init__(self, outputPointPen):
self.pen = outputPointPen
# a place to store the points for the current sub path
self.currentContour = None
def _flushContour(self):
pen = self.pen
contour = self.currentContour
if not contour:
pen.beginPath(identifier=self.currentContourIdentifier)
pen.endPath()
return
closed = contour[0][1] != "move"
if not closed:
lastSegmentType = "move"
else:
# Remove the first point and insert it at the end. When
# the list of points gets reversed, this point will then
# again be at the start. In other words, the following
# will hold:
# for N in range(len(originalContour)):
# originalContour[N] == reversedContour[-N]
contour.append(contour.pop(0))
# Find the first on-curve point.
firstOnCurve = None
for i in range(len(contour)):
if contour[i][1] is not None:
firstOnCurve = i
break
if firstOnCurve is None:
# There are no on-curve points, be basically have to
# do nothing but contour.reverse().
lastSegmentType = None
else:
lastSegmentType = contour[firstOnCurve][1]
contour.reverse()
if not closed:
# Open paths must start with a move, so we simply dump
# all off-curve points leading up to the first on-curve.
while contour[0][1] is None:
contour.pop(0)
pen.beginPath(identifier=self.currentContourIdentifier)
for pt, nextSegmentType, smooth, name, kwargs in contour:
if nextSegmentType is not None:
segmentType = lastSegmentType
lastSegmentType = nextSegmentType
else:
segmentType = None
pen.addPoint(
pt, segmentType=segmentType, smooth=smooth, name=name, **kwargs
)
pen.endPath()
[docs]
def beginPath(self, identifier=None, **kwargs):
if self.currentContour is not None:
raise PenError("Path already begun")
self.currentContour = []
self.currentContourIdentifier = identifier
self.onCurve = []
[docs]
def endPath(self):
if self.currentContour is None:
raise PenError("Path not begun")
self._flushContour()
self.currentContour = None
[docs]
def addPoint(
self, pt, segmentType=None, smooth=False, name=None, identifier=None, **kwargs
):
if self.currentContour is None:
raise PenError("Path not begun")
if identifier is not None:
kwargs["identifier"] = identifier
self.currentContour.append((pt, segmentType, smooth, name, kwargs))
[docs]
def addComponent(self, glyphName, transform, identifier=None, **kwargs):
if self.currentContour is not None:
raise PenError("Components must be added before or after contours")
self.pen.addComponent(glyphName, transform, identifier=identifier, **kwargs)
class DecomposingPointPen(LogMixin, AbstractPointPen):
"""Implements a 'addComponent' method that decomposes components
(i.e. draws them onto self as simple contours).
It can also be used as a mixin class (e.g. see DecomposingRecordingPointPen).
You must override beginPath, addPoint, endPath. You may
additionally override addVarComponent and addComponent.
By default a warning message is logged when a base glyph is missing;
set the class variable ``skipMissingComponents`` to False if you want
all instances of a sub-class to raise a :class:`MissingComponentError`
exception by default.
"""
skipMissingComponents = True
# alias error for convenience
MissingComponentError = MissingComponentError
def __init__(
self,
glyphSet,
*args,
skipMissingComponents=None,
reverseFlipped=False,
**kwargs,
):
"""Takes a 'glyphSet' argument (dict), in which the glyphs that are referenced
as components are looked up by their name.
If the optional 'reverseFlipped' argument is True, components whose transformation
matrix has a negative determinant will be decomposed with a reversed path direction
to compensate for the flip.
The optional 'skipMissingComponents' argument can be set to True/False to
override the homonymous class attribute for a given pen instance.
"""
super().__init__(*args, **kwargs)
self.glyphSet = glyphSet
self.skipMissingComponents = (
self.__class__.skipMissingComponents
if skipMissingComponents is None
else skipMissingComponents
)
self.reverseFlipped = reverseFlipped
def addComponent(self, baseGlyphName, transformation, identifier=None, **kwargs):
"""Transform the points of the base glyph and draw it onto self.
The `identifier` parameter and any extra kwargs are ignored.
"""
from fontTools.pens.transformPen import TransformPointPen
try:
glyph = self.glyphSet[baseGlyphName]
except KeyError:
if not self.skipMissingComponents:
raise MissingComponentError(baseGlyphName)
self.log.warning(
"glyph '%s' is missing from glyphSet; skipped" % baseGlyphName
)
else:
pen = self
if transformation != Identity:
pen = TransformPointPen(pen, transformation)
if self.reverseFlipped:
# if the transformation has a negative determinant, it will
# reverse the contour direction of the component
a, b, c, d = transformation[:4]
det = a * d - b * c
if a * d - b * c < 0:
pen = ReverseContourPointPen(pen)
glyph.drawPoints(pen)